TheCoatingStore.com

Results 1 to 2 of 2

Thread: Advice for puling out front core's corner

  1. #1
    Join Date
    Jun 2021
    Posts
    1

    Default Advice for puling out front core's corner

    Hello to all!

    Little by little I have been building my skills by working on an old project car I have, but this one is new to me. Below you see the photos of what I'm trying to repair, based on your experience, what will be the best way to pull back the bend metal to match the other side of the front core. Many thank for your advice!

    Best,

    ~ja


    IMG_7978.jpg
    IMG_7976.jpg
    IMG_7977.jpg
    IMG_7979.jpg

    PS. Why my images are being displayed too small?

  2. #2
    Join Date
    Nov 2005
    Posts
    44,921

    Default

    Quote Originally Posted by jachong View Post
    Hello to all!

    Little by little I have been building my skills by working on an old project car I have, but this one is new to me. Below you see the photos of what I'm trying to repair, based on your experience, what will be the best way to pull back the bend metal to match the other side of the front core. Many thank for your advice!

    Best,

    ~ja


    IMG_7978.jpg
    IMG_7976.jpg
    IMG_7977.jpg
    IMG_7979.jpg

    PS. Why my images are being displayed too small?
    The way it's straightened will normally depend on the tools you have on hand. I would probably use something to get behind or attach to the metal then pull it back using a Come-A-Long with a hook and chain while attaching the car to something so that it doesn't move.

    The one pictured below runs about $100


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •