Ron Covell has produced an excellent video to show some of the basics (and not so basic) method of putting metal together using a MIG welder. Below are some of the items covered in this video.
MIG welding is widely used by professionals and amateurs alike, but few people really understand how each variable affects the finished weld. This Program can be easily understood by a beginner but it covers information even seasoned professionals can learn from. Ron goes through the entire welding process step-by-step and gives clear descriptions of how each factor affects the weld, including wire speed, voltage, wire stickout, gun angle, travel speed and gas flow. He also covers plug welds, patch panels, welding aluminum and using flux core wire. You'll especially enjoy the bonus section on Plasma Cutting! You will receive FREE SHIPPING on this and all videos.
To order please call 609-859-3670 with credit card
Use our shopping cart at the link below...
Disclaimer: The ideas and methods described in this web site were developed under unique situations. Since these situations cannot be duplicated, you may get different results. Use and application of any of the site's content is at the user's own risk.
All information on this site is the property of Stuart's Autobodystore.com and may not be reproduced without prior written permission.