Spray Guns

Sharpe Finex
Gravity Feed Guns

These guns are the low priced end of the Sharpe line.  They come in Small "detail" guns or in the standard full-size guns.

Detail Gun
Fluid Tip: 1.0
Air Consumption CFM: 4.9

Full Size HVLP Gun
Fluid Tips Available 1.3, 1.4, 1.5 or 1.8
Air Consumption CFM: 11.4

Full Size Conventional Gun
Fluid Tips Available: 1.4 or 1.8
Air Consumption CFM: 11.9

Sharpe Titanium Series

One of the high-end gun models thisgun has been very popular for producing beautiful paint jobs.

T-1 HVLP Gun
Fluid Tips Available 1.3 or 1.5
Air Consumption 13.5 CFM

T-1 CG - Compliant Gun
Fluid Tips Available 1.2, 1.4, 1.6 or 1.7 Air Consumption Unpublished

Sharpe Razor

Amazing transfer efficiency using limited air supply • Optimized trigger pull and travel for improved feathering capability • Re-designed air caps and nozzle for increased performance • Backed by Sharpe’s trusted name and a full 3 year warranty • Made in the USA

LVLP Model is available with 1.3 or 1.4 Fluid Tips
Air consumption is 8.8 CFM

HVLP Model is available with 1.2, 1.3, 1.4 or 1.5 Fluid Tips
Air consumption is 14.4 CFM

Compliant Model is available with 1.2, 1.4 or 1.6 Fluid Tips

HVLP Primer Gun is available with 1.5, 1.8 and 2.3 Fluid Tips
Air Consumption is 14.4 CFM

To see a variety of Sharpe tools with prices click HERE

Inlet Pressure Gauges

Needed on most modern spray guns Sharpe makes several inlet pressure gauges.

 These gauges make it possible to accurately measure the air pressure at the gun where it can vary greatly from you regulator.
The air pressure needs to be controlled precisely so that the gun can perform properly as designed by the manufacturer.

Air Filters/Pressure Regulators

As air comes from the compressor it needs to be filtered to remove particulates, moisture and oil.

Piping the air to these tools they take the raw air and make if ready to use by making the pressure adjustable and/or removing unwanted moisture and dirt.

To see a variety of Sharpe tools with prices click HERE