Filters & Regulators


If you're setting up a shop it's best to pipe the air to a regulator that is easily accessible so that the air pressure can be easily adjusted for different applications.  In most cases the filtering of the air is done in the same location.  Below are some of the best values on the market for the purpose of filtering and regulating your compressed air.

Model  F88 Air Filter

REUSABLE edge type filter element
Highly effective at removing water, oil, contamination
10 Micron filter
Air inlet 1/2" f.p.t.
Air outlets 3/8" f.p.t. & 1/4" f.p.t. (plugged)
Filter capacity 75 CFM

(see store link below for discount  pricing)
 

Model 880a Air Control Unit

18C-3R Regulator with
160 lb. Inverted Gauge (GA-160U) & Air Cock (1-HC-1885)
Additional regulated outlet included
Filtered main line outlet included
Air inlet 1/2" f.p.t.
Filter capacity 75 CFM
Regulator capacity 50 CFM

 

(see store link below for discount  pricing)
 

The 606 Line
of 
Air Control Units

 

• Features large REUSABLE edge type filter element
• Most effective at removing water, oil contamination
• 5 Micron filtration
• 120 CFM capacity
• Built-in wall mount
• Air inlet: 1/2" F.P.T.
• Two air outlets: 3/8" F.P.T. (includes one plug)

(see store link below for discount  pricing)

Model 606A

• One 18C-3R Regulator with 160 psi inverted gauge and air cock/shut-off
• Two regulated outlets (only one with air cock)
• Additional unregulated air outlet
• Reusable edge-type filter element filters down to 5 microns
• Air inlet: 1/2" F.P.T.
• Filter capacity: 120 CFM
• Regulator capacity: 50 CFM

(see store link below for discount  pricing)

Model 606B

• Includes regulator with 160 psi gage
• Two regulated outlets one with air cock/shut-off
• One filtered main line outlet with 200 psi gage and air cock/shut-off
• Filters down to 5 micron - reusable edge type filter

(see store link below for discount  pricing)

DRYAIRE™ Desiccant Air Drying System

3 Stage Filter

100% indicating silica gel for maximum moisture absorption
Easy desiccant change out
Built-in sight glasses for monitoring
Self-relieving air regulator
Mounting bracket included
Sharpe's 2 year warranty

(see store link below for discount  pricing)

DRYAIRE™ Membrane Air Drying System

 

  • New Wave in Air Dryer Technology. Originally designed for OEM application.
        Now available for shop use.
  • Maintenance-Free Membrane Dryer – No refrigerants or desiccants to replace -
        No Regeneration Required
  • Stage 1 Filter provides removal of water and contaminates down to 5 Microns
  • Stage 2 Coalescer provides removal of oil and sub-micronic particles down to .01 microns
  • Maintains – 40° F Dew Point while achieving 0% compressed air humidity
  • Filtering capacity 30 CFM @ up to 175 PSI
  • Lightweight, easy-to-install, simple to operate

(see store link below for discount  pricing)

 


Desiccant Air Dryer

 

DeVilbiss Desiccant Air Dryer
Order "DeVilbiss #DAD-500"


 
(
see store link below for discount  pricing)

~   3 Stage Drying and Filtering System  ~

1st stage removes oil, water & dirt down to 5 microns.

2nd stage removes oil aerosols & particles down to .01 micron.

3rd stage uses low dusting desiccant to trap water vapor.

First and second stages feature automatic bowl drain
for maintenance-free operation

Filter change indicators for coalescer and
desiccant eliminate guesswork.

Standard built-in wall mounting bracket.


10 lbs. of replacement desiccant.... Order "DEV DAD1" (

see store for discount  pricing)