Results 1 to 6 of 6

Thread: Devilbiss EZ liners

  1. 03-16-2006, 11:56 PM #1
    dt196
    dt196 is offline Senior Member
    Send a message via AIM to dt196
    Join Date
    Mar 2006
    Location
    Columbus, Ohio
    Posts
    118

    Default Devilbiss EZ liners

    Len,
    I saw on your site where you said that Devilbiss makes adapters to use this system with other guns. I've been using a Devilbiss OMX for a number of years. I also have a Prime Time primer gun. I use the liners with both guns and don't like the prospect of painting without them. Point is I'm looking at stepping up to a newer gun (Sata NR 2000 or Jaguar SLP) but the thing is I gotta be able to use the bag system! I looked at the 3m system, didn't care for it. It was too hard for these arthritic hands to keep twisting that cap off.
    Where can I get some more info on what adapters are available for which guns?
    Thanks, and I love the site!
    I've been doing this stuff for 29 years and I've learned a few things in the few days I've been here. Never too old to learn!!
    Reply With Quote Reply With Quote
  2. 03-17-2006, 10:23 AM #2
    Len's Avatar
    Len
    Len is offline Administrator
    Join Date
    Nov 2005
    Posts
    23,702

    Default

    I have some extra adapters, if you send me an eMail with your name and address I can send you a pack. len@autobodystore.com

    If you're planning on purchasing a new gun you should look at the DeVilbiss GTI-620G (HVLP) or the GFG-670G (Plus), both of thee guns spray great and you wouldn't need the adapters.

    Reply With Quote Reply With Quote
  3. 03-17-2006, 02:20 PM #3
    craig429
    craig429 is offline A New Member
    Join Date
    Nov 2005
    Posts
    7

    Default

    I have a Sata NR2000 that I use the EZ liners with. The liners have adapters that Len said he had extras of. The adapter for the Sata had to be pressed in, at first it seemed like it wouldn't fit, but with some pressure with a punch, it did fit.
    Reply With Quote Reply With Quote
  4. 03-17-2006, 07:26 PM #4
    dt196
    dt196 is offline Senior Member
    Send a message via AIM to dt196
    Join Date
    Mar 2006
    Location
    Columbus, Ohio
    Posts
    118

    Default

    These adapters are metal? Where do you get them? I didn't see them in the kit (48 liners and bushings) that I buy. I haven't been able to find them on Devilbiss site.
    Reply With Quote Reply With Quote
  5. 03-17-2006, 07:27 PM #5
    brucebotti
    brucebotti is offline Senior Member
    Join Date
    Dec 2005
    Location
    South Windsor, CT
    Posts
    96

    Default EZ Liners

    I used the EZ Liners for years, but completely abandoned them once the new 3M system came out. I found that the bags restricted the amount that I could put in the cup, plus they would spring a leak from time to time. I ended up only using them when I had to spray with the gun inverted. Now I don't use them at all. Just my $.02.
    Bruce
    Reply With Quote Reply With Quote
  6. 03-17-2006, 07:41 PM #6
    Roch_Greg
    Roch_Greg is offline Moderator
    Join Date
    Nov 2005
    Location
    Rochester NY
    Posts
    1,370

    Default

    well my order from Len just got in today and I'll be shooting the first time tommorrow with the 3M PPS (Paint Preperation System).

    I'm very anxious to see how they work out.
    Reply With Quote Reply With Quote
« CAT Jaguar SLP | adjusting SRI-W »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules