Hi, everyone, im new here, great forum. Ive been doing alot of reading here but still cant make up my mind.

Not much auto paint experience, but do with with latex & airless painting.


We recently had a custom bath vanity sprayed and finished with automotive products, PPG Concecpt. Love the finish.

I intend to repeat the same process for our custom kitchen. This time, we'll be doing to spraying, or atleast to attempt to lol.


Its killing me right now, i cant seem to figure out what system to go with. I must mention that we are only spraying door faces, and cabinet faces. Insides are getting stained & finish. Cabinet are birch made.


Objective : Achieve a great finish, little to no orange peel, ...
Plan to spray: PPG Concept or equivalent (Concept is alot of $$) primer, base, and clear.

Considering the following:

1) Purchase a turbine system, thinking about 4-5 stage with an accuspray 10G gravity gun
2) I have a portercable compressor that puts out 6.0 @ 40, along with a another 20 gallon with maybe similar specs @ 40. Can i possibly run a decent gun off of these?
3) Buy a larger compressor, maybe in the 400 range, but i have no other use for it. I dont repairs cars or fill tires lol. Plus it requires a 220v and very big. Compressor im looking at does about 13.3@40
4) USe my existing compressors and purchase a mini, spraygunworld.com said i could do that. In all i would have about a 25 gallon tank.

Can the same gun spray primer, base, and clear?


Dont mind spending a few bucks extra for a decent gun.

Im not a shop, nor do i plan on taking on outside or other work. Strictly for this project alone.

Thanks
Rich