last minute tips?
Hello, got my Chromabase paint and mid-temp basemaker, and Nason clear and mid-temp activator.. Got my data sheets off the internet.. All the data sheets give a range of tip sizes and pressures.. so to possibly reduce the fiddling time and / or $$$$ waste of base paint (red metalic$$$) can anyone give a more fine-tuned recommended tip size, pressure settings, I'll be breaking in my Dev plus gun on this repair. Thanks Mike
I use a Sharpe Platnum HO hvlp with a 1.4 tip and have excellent results. In most cases 2 coats cover very well at a 1 to 1 mix ratio, just don't over think yourself. Its great stuff !
Both the 1.3 and the 1.4 usually work well with that gun. I'd probably go with the 1.4 but you should try both just to see which you like best.
Originally Posted by MikeP