On Sat, 28 Jan 2006 14:11:55 EST, Cvette67 wrote
> Thanks for the welcome........i wanted to ask a question but it wont
> let me sign in......i am getting ready to paint my
> Harley......again........and need to know the tricks of shooting
> clear over Vinyl laminate graphics....any help would be greatly
appreciated.......thanks.......Bill
Bill
A good clear will stick to the vinyl as long as you remove the gloss. The
problem is that the color is very thin on some graphics and sandpaper will
remove the color from around the edge or even in the middle of the graphic.
It's best to use a sanding paste like Scuff Stuff then wash the surface well
to remove the residue. I'd dampen a rag or paper towel then apply a little
Scuff stuff to the towell and work it in. scuff the surface of the vinyl
until the gloss is gone but not so much that you remove the color. This
should give a "good" quality clear plenty of tooth to make it adhere well.
Here's a link to the Scuff Stuff....
Good Luck,
Len
Autobodystore.com
Thanks Len........will place an order for Scuff Stuff soon...also.....wanted to tell you.....my house was broken into 3 years ago while i was out of town......a number of things were taken......including a video.......your painting video.....the only video stolen.....i guess the thiefs needed to paint their get away car......so....i will also be ordering a new one......this time a DVD........and i will store it in my safe.....i didnt realize it was so valueable......thanks again for this site and all your help.......Bill

Reply With Quote