TheCoatingStore.com

Results 1 to 3 of 3

Thread: painting garnish moldings

  1. #1
    Join Date
    Sep 2017
    Posts
    18

    Default painting garnish moldings

    now that my dash is painted, im moving on to the garnish moldings on my 40 coupe.. the picture is not my molding but a picture i took off the net.. they are very similar to mine... they are very flimsy as they are only about 1 1/8" wide.. question is, should i use the touch up gun that came with the paint gun set (HF).. the tip is only 1.0 and i would think that it would be too small to spray the omni single stage that suggests a 1.4 tip.. ill be painting the side moldings, 1/4 moldings and rear moldings also.. they are all about the same 1 1/8" wide
    widnshield garnish.JPG

  2. #2
    Join Date
    Nov 2005
    Location
    Talladega, Alabama
    Posts
    533

    Default

    Yes, it should work well.

  3. #3
    Join Date
    Sep 2017
    Posts
    18

    Default

    Quote Originally Posted by SamG View Post
    Yes, it should work well.
    ok. ill give it a go

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •