Dent removal ?s.

[SStampede]

When using a stud gun, do you work from the center out, or from the outside edge to the center? And when using a hammer and dolly, samething?

Thanks.

[James M]

There are no hard and fast rules for stud gun use because every dent is different. BUT generally speaking I start at the outside and work my way to the center with the stud gun. Hammer and dolly is usually the other way around (again - depending on the dent configuration.)

[Ed in SC.]

Hi there SStampede, just ran across your post.
Here are some videos of the first time I used a stud gun.

Links
#1.
#2.

There are 6 move videos of this repair.
Good luck, Ed.

[another2centsworth]

bad links.................

[Ed in SC.]

Thanks Another 2 cents worth,
Made changes to the Videos.
Please let me know if the changes are working?