A few sanding/paint questions

[haroldp]

Hi folks, my first post here but i'll been reading about sanding/painting cars for weeks now. My grandson wants me and him to paint his jeep wrangler i gave him for his 16th bday when schools out for the summer. I have painted lots of cabinets and things around the shop like camper tops, tractor, trailer, etc.but no complete car. We will be changing the color from dark green to a med orange. The jeep is in real good shape for its age with only alittle clear coat coming off on the one fender about the size of a dollar bill. My question is what grit paper do i need to start with on a 6" DA sander to get it ready for primer? They is only 2 small dents on the hood( which has been painted since new) bc/cc, the rest of body is straight and rust free. I'm thinking of going with acrylic urethane sc or bc/cc. Any thoughts on the paint would be helpful also.
The gun i'm going to use is old school devilbiss JGA 502. This will be my last complete paint job, so no new gun for me. Also any thoughts on how much primer/paint i would need for this small jeep.

Thanks for the great site to help people like me and grandson.

[Len]

Hi folks, my first post here but i'll been reading about sanding/painting cars for weeks now. My grandson wants me and him to paint his jeep wrangler i gave him for his 16th bday when schools out for the summer. I have painted lots of cabinets and things around the shop like camper tops, tractor, trailer, etc.but no complete car. We will be changing the color from dark green to a med orange. The jeep is in real good shape for its age with only alittle clear coat coming off on the one fender about the size of a dollar bill. My question is what grit paper do i need to start with on a 6" DA sander to get it ready for primer? They is only 2 small dents on the hood( which has been painted since new) bc/cc, the rest of body is straight and rust free. I'm thinking of going with acrylic urethane sc or bc/cc. Any thoughts on the paint would be helpful also.
The gun i'm going to use is old school devilbiss JGA 502. This will be my last complete paint job, so no new gun for me. Also any thoughts on how much primer/paint i would need for this small jeep.

Thanks for the great site to help people like me and grandson.

Without a top you should be able to get away with two quarts of "good" paint or three if you're using inexpensive paint. You would also need about two quarts of primer and two quarts of clear if you're only shooting the exterior.

[haroldp]

Thanks Len, no top and half doors. Any help on the grits for air DA sander, never used one before. I used electric for cabinets. Also the paint looks factory except the hood which is bc/cc, would i need a sealer? I think i have read that bc/cc is more forgiving than sc, is that right?

[Len]

Thanks Len, no top and half doors. Any help on the grits for air DA sander, never used one before. I used electric for cabinets. Also the paint looks factory except the hood which is bc/cc, would i need a sealer? I think i have read that bc/cc is more forgiving than sc, is that right?

If you're just scuffing with the DA then 400 should do the trick. Base/clear is a little easier to get a consistent finish but because you are applying more coats you need to be pay attention for a longer spraying session and there's more opportunity for make mistakes. If your substrate is all the same then a sealer may not be required but if you have different materials that you're spraying over then you should use sealer.

[haroldp]

Not sure whats on the hood, but ever who did it was a pro and did a good job. Anyway to test to see if i need a sealer on the hood?

By the way, what is K2? is it a urethane primer?

Thanks for your help.

[style]

From what it sounds like with out pics you could just da the whole thing with 600 and then shoot it with base and clear.. primers more for hiding defects like bare metal and sand marks...