Wizards Mystic Cut

[another2centsworth]

Seriously? "...don't go there." Someone has to so people don't have to rely on those too bored to make the effort.

Robert

Robert don't take it personal. This is no new product. Body shop 1/2 mile up the rode has been using mystic for at least 5 yrs. They were the distributor for this area for a long time up until recently. Mystic makes a neat squeegee too. I have had it for years. You make like it is brand spanking new stuff never before seen or used. When I said don't go there I mean don't make like it has just came out.....you can plug it all you want just don't make it out to be anything new. Maybe it just made it out west this week I don't know about that but it has been in the south for quite awhile. Sorry if it rubbed you wrong. I do respect your expertise.

Henry.....hush.

EDIT: Wizard not Mystic makes the squeegee. I 'discovered' Wizard Mystic Cut and their other products years ago.

[Henry]

Robert don't take it personal. This is no new product. Body shop 1/2 mile up the rode has been using mystic for at least 5 yrs. They were the distributor for this area for a long time up until recently. Mystic makes a neat squeegee too. I have had it for years. You make like it is brand spanking new stuff never before seen or used. When I said don't go there I mean don't make like it has just came out.....you can plug it all you want just don't make it out to be anything new. Maybe it just made it out west this week I don't know about that but it has been in the south for quite awhile. Sorry if it rubbed you wrong. I do respect your expertise.

Henry.....hush.

You little rodent. You don't tell me HUSH. I've had it with you trying to correct me, edit what I say and to whom I say it via PM.

One would think if you wanted to challenge Robert you would do it privately via PM not that Robert is wrong but you embarrassingly are wrong. Yes YOU are wrong you pimple headed little twit and here are the facts about Wizard MYSTIC CUT (and run down the road and tell your friends too).

MYSTIC CUT by Wizard was FIRST introduced at SEMA 2010 for the first time but was not ready for sale and full production until the end of 2010 - 2011. SO, shove that up your ass and shut your stupid mouth.

Robert is a big boy and can take care of himself. I had to write this reply because I didn't mess with you but you find the need to tell me "HUSH"? You're a little punk!

Henry

[another2centsworth]

lol!!!!!!!

Henry the disallusioned....

[Henry]

lol!!!!!!!

Henry the disallusioned....

Thought you'd shut up with the truth. What's the matter have no comment on how old Mystic Cut is? You should feel like a real jerk right now.

Henry

[Mooch]

I sent the company an e mail trying to head any arguments and just received the answer .

The company has been in business since 1986 but this product with the Nano Tech is new . Heres the answer ..I sent the question this morning and just got the answer ..pretty damn good .

Thank you for your inquiry, Mystic first hit shelves April of 2011.



Kathy McTaggart

Wizards Products

800-356-7223

kathym@wizardsproducts.com

We will let you go on this one Tim ,after all you are from Alabama .


Mooch lol

[Henry]

I sent the company an e mail trying to head any arguments and just received the answer .

The company has been in business since 1986 but this product with the Nano Tech is new . Heres the answer ..I sent the question this morning and just got the answer ..pretty damn good .


We will let you go on this one Tim ,after all you are from Alabama .


Mooch lol

Big mouth pissed me off so much today that I had no time for emails. I phoned and spoke with a Director of Products and Sales. I even paid for the call at:

Office: 763-497-5155

Remember when he used to include excerps from the Bible? Now, he's forgotten anything he read in the Bible and forgot how to act like a man.

Henry

[Chevman]

http://www.youtube.com/watch?v=Au7hsWIsedA

[slows10]

Henry I gotta say your my new hero. I know I disagreed with you last week and I didnt really mean anything by it. But your last 2 posts nailed it man. More people on more forums think that guy is an idiot, a world class fool really. I thought I told it like it is, but it is nice to see someone finally hammer it in. I thought this forum was a bit rough around the edges when I first joined but now I understand when one of the kids need a scolding on here, they will get it especially when they are completely wrong to a guy like robert.

[Henry]

Henry I gotta say your my new hero. I know I disagreed with you last week and I didnt really mean anything by it. But your last 2 posts nailed it man. More people on more forums think that guy is an idiot, a world class fool really. I thought I told it like it is, but it is nice to see someone finally hammer it in. I thought this forum was a bit rough around the edges when I first joined but now I understand when one of the kids need a scolding on here, they will get it especially when they are completely wrong to a guy like robert.

Thanks for the words but arguing with people, especially on Len's $$, is foolish.

I'll be honest with you. I found this site while trying to search out guns about 15+ years ago. Been active here since AND I keep learning new things. I don't deal with other forums and I'm sure there are more out there that are good. I stay here because I TRUST this site and the information I learn here. Also, through the years I've seen tons of new people come here and produce projects that have won trophies when they got done.
I sit back and read this forum and keep seeing more new people from around the world with projects that are important to them. The information they (we) come here to learn or share should be accurate and I think Len, Robert and other Pros and non Pros keep it as accurate as possible.

The real beauty is what Len sells in the store are products he has used himself in his own custom shop. This makes him, who holds sandpaper in his hands and gets dirty the way we all do, steps above a salesperson. No hard sell here but very competative prices, good service, lots of learning and a great bunch of board members like you and me. Take care.

Henry

[Henry]

http://www.youtube.com/watch?v=Au7hsWIsedA

Thanks for the LINK.

Here's another link to the SEMA 2010 show introducing Mystic Cut:

http://www.youtube.com/watch?v=-o9GG...eature=related

Henry

[another2centsworth]

Here is the squeegee I got for free years ago when I FIRST saw MYSTIC CUT on the shelf.They might have changed it but mystic cut has been around for years. Henry even traced back to 2010. Unlike henry...I can admit IF I am wrong but I don't act like henry (makes me laugh) period. Thank God. Slow is as slow does. Troll on I have been busy working today and won't be back until later. So Robert what happened to the one product and different pads you invented. Is that still on? I will buy your video because I respect you. Hope you can forgive me. I made a couple of simple statements from my own experience yrs ago.

100_2362.jpg100_2364.jpg

[Len]

Here is the squeegee I got for free years ago when I FIRST saw MYSTIC CUT on the shelf.They might have changed it but mystic cut has been around for years. Henry even traced back to 2010. Unlike henry...I can admit IF I am wrong but I don't act like henry (makes me laugh) period. Thank God. Slow is as slow does. Troll on I have been busy working today and won't be back until later. So Robert what happened to the one product and different pads you invented. Is that still on? I will buy your video because I respect you. Hope you can forgive me. I made a couple of simple statements from my own experience yrs ago.

100_2362.jpg100_2364.jpg

We still sell Robert's Sure Finish, it's less aggressive than the Mystic Cut but it produces about the same result it just takes longer. As far as the pads go we still carry the Sure Finish wool and foam pads as well as a new purple "Foamed Wool Pad" that Robert turned us on to.

LINK

[Robert]

Here is the squeegee I got for free years ago when I FIRST saw MYSTIC CUT on the shelf.They might have changed it but mystic cut has been around for years. Henry even traced back to 2010. Unlike henry...I can admit IF I am wrong but I don't act like henry (makes me laugh) period. Thank God. Slow is as slow does. Troll on I have been busy working today and won't be back until later. So Robert what happened to the one product and different pads you invented. Is that still on? I will buy your video because I respect you. Hope you can forgive me. I made a couple of simple statements from my own experience yrs ago.

100_2362.jpg100_2364.jpg

No one can keep up with every change in every product line. We all have problems with target selection but thanks for helping me find out how well covered I am, lol.

The Mystic and a couple of others cut faster but the Sure Finish will do most normal paint correction safely and more than fast enough.

Robert

[Robert]

Thanks for the words but arguing with people, especially on Len's $$, is foolish.

I'll be honest with you. I found this site while trying to search out guns about 15+ years ago. Been active here since AND I keep learning new things. I don't deal with other forums and I'm sure there are more out there that are good. I stay here because I TRUST this site and the information I learn here. Also, through the years I've seen tons of new people come here and produce projects that have won trophies when they got done.
I sit back and read this forum and keep seeing more new people from around the world with projects that are important to them. The information they (we) come here to learn or share should be accurate and I think Len, Robert and other Pros and non Pros keep it as accurate as possible.

The real beauty is what Len sells in the store are products he has used himself in his own custom shop. This makes him, who holds sandpaper in his hands and gets dirty the way we all do, steps above a salesperson. No hard sell here but very competative prices, good service, lots of learning and a great bunch of board members like you and me. Take care.

Henry

On behalf of myself, thank you. As an aside, well said.

Robert

[Chevman]

Seems like a lot of mental anguish over nothing here. I don't think anyone said that the Wizards company is new, they just have a new product.
These are testimonials from their web site.

"I have owned and operated an autobody repair business for 15 years. I have used Wizards Products for the last 6 years. Love them! Safe for my shop. I sand and buff most of my paint jobs from a 2000 to a 3000 grit wet sand. I use Turbo Cut, Finish Cut and Shine Master with your buffing pads and finish with Mist-N-Shine. I get a perfect shine that will stay."

-Corey Kuhlemeier
Kuhlemeier Auto Sales
Rudd, IA
www.kuhlemeierautosales.com






--------------------------------------------------------------------------------





"I own Hank's Auto Refinishing and have been in business for 12 years. I've used Wizards Products the entire time. I like that your products are bodyshop safe. I love the Mist-N-Shine, it's great for the shop and for use at car shows and cruises. Shine Master gives me a very slick finish that my customers love and always ask how you get the paint so slippery smooth."

-Henry Skocz
Hank's Auto Refinishing
Butler, PA






--------------------------------------------------------------------------------





"This is my 1967 Mustang. I have had this car since I was 15 (29 years). It was cut, buffed and polished all with Wizards in 2007. That is why I became a dealer!"

-Andy Dunn
Dunn's Auto & Machine
Beloit, WI






--------------------------------------------------------------------------------