how much would this cost to fix

[b20forlife]

ok so i have some holes that cut out of the side from a previous body kit.now i would like to have some sheet metal welded up and body worked in that section. the holes are on both sides. so lmk what you think it will cost to do it right thanks

[Len]

In our shop it would cost you approximately $350 per side with paint, $250 per side without paint.

[Henry]

[QUOTE=b20forlife;166316]ok so i have some holes that cut out of the side from a previous body kit.now i would like to have some sheet metal welded up and body worked in that section. the holes are on both sides. so lmk what you think it will cost to do it right thanks


[QUOTE]

Although the little guy looks cute in the photo, make sure his hands are washed well from the brake dust on that rim.
Also, I would say, Len's price would have to be without ANY other soft metal parts where rust has set into the panel ready to pop its head with another hole. Henry

[fixdent]

$250 per side without paint.

Geez Len....only $100 for paint (incl materials) sounds pretty cheap...

Even though I would only blend, 2.0 hrs plus materials, approx $200 would be my calculation, for each side.

--
Gordon

[Len]

Geez Len....only $100 for paint (incl materials) sounds pretty cheap...

Even though I would only blend, 2.0 hrs plus materials, approx $200 would be my calculation, for each side.

--
Gordon

That's $100 per side. Blending both sides would probably take less than a pint of paint.