windshield molding 87 honda CRX

[MikeP]

Starting serious work on my next project, making sure I have the needed parts before I get too deep. I bought a new windshield, but my glass guy doesn't have the reveal molding for it. Honda has long discontinued it. It is a small flexible "T" with a harpoon style anchor that gets squished into the urethane after the windshield is installed, goes along the top and sides. Does anyone know where I could get it? Or, a generic molding? Or, a similar style from another car? it certainly does not seem too special. thanks. Mike

[JCCLARK]

Check Ebay, I've seen them for my 98 Civic on there.
Good luck!

[MikeP]

Been looking for almost a year. The 1st generation CRX's are MUCH harder to find parts for than 2nd gens. But, this is what my wife wants... so.... I have to think there is a generic reveal that I can use. The body guys here must have run into this on some of their projects! (I hope) Mike

[Len]

I would be calling around to see if any local junk yards have any of the CRXs you're looking for. If they say they have the CRX you can take a ride to find the parts you need. Be sure to take tools because you may need to remove the parts yourself.

[Steve g]

Starting serious work on my next project, making sure I have the needed parts before I get too deep. I bought a new windshield, but my glass guy doesn't have the reveal molding for it. Honda has long discontinued it. It is a small flexible "T" with a harpoon style anchor that gets squished into the urethane after the windshield is installed, goes along the top and sides. Does anyone know where I could get it? Or, a generic molding? Or, a similar style from another car? it certainly does not seem too special. thanks. Mike

That sound virtually identical to the one that was used on my 96 (95-995) Olds Aurora.

Steve g

[MikeP]

I have the old one in hand, I'm thinking I'll be visiting dealerships, hoping for a parts guy that doesn't mind looking around. I would think I can find something that will work. Thanks!