1965 Mustang , The guy is bringing me the car in pieces. I have the hood, deck lid, doors, fenders. It is going to be painted Metallic blue with silver stripes down the hood,roof and trunk.
The plan is to paint the underside of hood,deck lid, doors . I plan on doing any bodywork on these panels while I have them and apply 2k hi-build to the top sides. He then wants me to give these parts back to him so he can put them back on the car . When everything is back together I will paint the exterior.
He will bring me the car without the doors etc, so I can paint the dash, firewall, and door jambs.
Kind of a dumb question I guess but would you guys go ahead and sand the 2k hi-build on the hood,doors,deck lid, fenders before you return them to be reinnstalled or wait until they are on the car.
I guess my thoughts are the 2k would have longer to cure and shrink if I waited.Sometimes I over think things.
Any advice greatly appreciated.
Bitterness of a poor quality job long remains after the sweetness of a low price is forgotten