Results 1 to 9 of 9

Thread: Dura-Block GMS Limited Time Special

  1. #1
    Join Date
    Nov 2005
    Posts
    23,706

    Default Dura-Block GMS Limited Time Special

    We are offering the Dura-Block 7003GMS gun with the 1.3 AND the 1.5 fluid tips for the price of just the 1.3 tip. You can order this special in the Store or you can call the toll free order line 1-888-485-5008. This is a $29.95 tip kit for free when you order the gun.

    Last edited by Len; 12-13-2005 at 12:53 PM.

  2. #2
    Join Date
    Nov 2005
    Posts
    16

    Question air requirements

    Len-
    Do you happen to know the air requirements for the Dura-Block 7003GMS??

  3. #3
    Join Date
    Nov 2005
    Posts
    23,706

    Default 10.5 Cfm

    I've been told by the company that it's 10.5 @ 30 CFM.

  4. #4
    Join Date
    Nov 2005
    Posts
    7

    Default

    Len, how does the gms compare to the finishline 3.

  5. #5
    Join Date
    Nov 2005
    Posts
    23,706

    Default

    Both guns are good buys for the price. The GMS comes with the inlet pressure valve/gauge and a cup swivel that the FLG does not. I've been spraying more with the GMS lately and find that it's a really good all-round gun, it can be used for primer as well as top coats. Dura-Block also makes the 7004 which is a smaller version of the GMS that I received yesterday and I'll be using in the next week or two. This smaller version is about the size of the DeVilbiss SRI but a little less than half the price and also comes with the cup swivel and inlet valve/gauge.

  6. #6
    Join Date
    Nov 2005
    Posts
    2,587

    Default which DURA gun

    Len; what's with this gun. For $129 what does it compare to. How well will it lay down clear. Which other would you suggest. Thanks. Henry

  7. #7
    Join Date
    Nov 2005
    Posts
    23,706

    Default Gms

    I'm not sure where exactly the 7003 would fall but so far I've sprayed primer, base, clear, single stage and Zero Rust with it and it performed very well. Does it perform as well as a $400 gun? No, but it's up there with some $200 guns. I haven't used the touch up gun yet so I can't comment on it but I will be spraying some primer on a few small areas with it next week and I plan on shooting the jambs of this 68 Newport I'm restoring with it but that probably won't be for a couple more weeks.

    I'm pretty impressed with just about all the Dura-Block products from the smallest sanding blocks right up to the 007 spray gun. They are innovative, well engineered and priced very well.

  8. #8
    Join Date
    Nov 2005
    Location
    Roseburg,OREGON
    Posts
    396

    Default

    Len how long will this special last ?
    duhhhhhhhhhhhhhhh I just saw date when I looked in store....
    take Care
    Merry xmas
    Earl
    Last edited by Ranchero_65; 12-18-2005 at 11:58 PM.
    Take Care
    Earl

    MY Project
    www.ranchero65.com

  9. #9
    Join Date
    Nov 2005
    Posts
    23,706

    Default The end of January or 50 guns.

    These are being sold by a couple of retailers and myself. The warehouse has 50 guns they will sell with two tips. The sale will end when the 50 guns are gone or on 1/31/06, whichever comes first. I doubt that the 50 will last until the end of January.

    If you've ordered before drop me a message or eMail telling me you want one and include the last 4 digits of your credit card number and phone number or just give me a call at 1-888-485-5008.

    I will also send this kit with any of the 7003GMS guns sold during this time period. So you could order from the store if you want; page linked below.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •