Results 1 to 3 of 3

Thread: Epoxy - scuff and coat with Zero Rust?

  1. 08-24-2008, 03:19 PM #1
    Thumper
    Thumper is offline A New Member
    Join Date
    Nov 2007
    Location
    Calgary, Canada
    Posts
    4

    Default Epoxy - scuff and coat with Zero Rust?

    Hello:
    I have new replacement fenders in the factory epoxy (rubbed it hard with lacquer thinner, seems stuck really well). For the underside of the fenders can I scuff the epoxy and spray it with Zero Rust (rest the chassis is in Zero Rust) or do I need to take it down to bare metal?

    Thanks
    Michael
    Reply With Quote Reply With Quote
  2. 08-25-2008, 07:10 PM #2
    PetesPonies
    PetesPonies is offline Senior Member
    Join Date
    Dec 2005
    Location
    Maryland
    Posts
    86

    Default

    Whatever you want to do to the underside, you should scuff the epoxy. I wouldn't cover in ZR, but thats another story.
    Pete's Ponies
    Mustang RUSToration & Performance
    Reply With Quote Reply With Quote
  3. 08-25-2008, 09:27 PM #3
    Len's Avatar
    Len
    Len is offline Administrator
    Join Date
    Nov 2005
    Posts
    23,871

    Default

    Quote Originally Posted by Thumper
    Hello:
    I have new replacement fenders in the factory epoxy (rubbed it hard with lacquer thinner, seems stuck really well). For the underside of the fenders can I scuff the epoxy and spray it with Zero Rust (rest the chassis is in Zero Rust) or do I need to take it down to bare metal?

    Thanks
    Michael
    No need to take it to the metal just sand it with some 320 or 400 then spray with a couple coats of Zero Rust.
    Reply With Quote Reply With Quote
« Help! Rookie question. | Epoxy Primer...how much do I need? »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules