Search:

So I use PPG DX103 to clean the house now haha jk.

I think your doing a great job for a beginner. But I would have used basecoat and a flat clear much easier and would be hard to screw up at all. but that being said the transition from flat to...

It may just be me but when you sprayed the flat color you are not overlapping enough. Your passes very greatly from one pass to another. I over lap 75% when I paint (also I don't spray much single...

that 250 Jayson sprays cost 700.00 per kit first time out the door but that's if you have to buy everything clear, hardener,reducer

I'm with Len except I don't have a cheese grater (I need one tho). I still start with 36grit but I'm young yet and need to learn to sand. Then I can move up to the cheese grater :)

I have used some PPG Delfleet Evolution F3911 Clear, Its nice but takes a little bit of time to harden but is very tough stuff.

ah yes the original hide-a-key, Didn't catch on as the inventor had thought it would. Another idea ahead of it's time.......

I also have this same unit went together no problem

IMRON by Dupont very strong stuff also PPG has a Delfeet line you can check into. Both have chemical / scratch resistant clears

or are chemical/scratch resistant by themselves.

I could never...

Site for HOK stuff online
Depending on color HOK stuff is cheaper than the PPG Vibrance line by a long shot

http://www.smartshoppersinc.com/HouseOfKolor/houseofkolor2.html

Chumpi , No one here is complaining about you nor did you offend anyone. you posted good information and that's that. not sure why you are acting like someone kicked you in the balls, any way hope...

Well if our friend here is from overseas they call clearcoat lacquer. But since I don't know the exact meaning of Nitro paint for the base I really don't have answer.

I'm guessing that by Nitro you mean solvent based paint? and the DC4000 you are asking about is the PPG DC4000 Clearcoat?

I have used PPG Envirobase and PPG DBC over wood before and Used the...

Sweet thanks!

I looked but did not find any PPG paints being sold. only their own brand. The only things I did find were the Vibrance pearls and toners and reducers and color chips.

maybe I'm not looking in the...

well if they glow red there is no clear that is going to stand up to that

Yes it will take forever to dry with no air movement but if its 80-100 degrees out a box fan will do wonders

Ya paint is paint but water is nice . If you just do spot repairs get yourself a hairdryer this is a must have tool or I suppose you could buy a $70 air hogging blower but I prefer the $20 walmart...

I have used PPG DX330 solvent cleaner over Envirobase with no problems and I have used SX1005 Waterbased Cleaner over Envirobase and had problems.

On the waterbased cleaner you want to fine mist...

well unless you get trash in the base........

You would think this would be the one to get. Never have to worry about desiccant maintenance ever again!

I have been looking at these but I don't know of anyone using membrane dryers
...

its all in the air exchange. The air in the down draft booth is actually changing very rapidly and the supply fan will add incoming air just a tad bit over whats going out to create the pressure....

Ya the 1200 degrees seems a bit of a stretch maybe closer to 600 at the head and cooler to the tip.

You could check on the Clear powdercoat it does exist

put a temp gun on it and see what it...

the only difference is that the plastic cover and timer controls are different its been the same shaker for all these years. just now it has guards and safety switches

this is what my connection looks like it a lil different than the one you linked to

http://i219.photobucket.com/albums/cc277/Dwydir/S1040001.jpg

I have a similar one to this but mine only has one chain connection, the upper one. It works great but now that I look at it it would be great to get a new one with both connections.

Boy, No Peer presure here...... If Len wants he could make it so only paying customers can view this forum.

I haven't boughten anything from Len just yet, but I have tried to help where I can...

I have a dual red devil shaker and its only had automotive 10w30 in it 11oz

http://reddevilequipment.com/images/pdf/14001410shaker-om.pdf

ah closing the gap between SATA's huh

I can only do basecoat. they were asking for single stage.

56 /PPG# 81739 - CORVETTE BRIGHT YELLOW. for PPG they are the same
956 / PPG# 81739 - CORVETTE BRIGHT YELLOW

for the prime formula it is a leaded paint

they might not know what you mean by semi gloss kinda sounds like house paint. ask them to mix interior paint. if they have paint system there at the store they should be able to mix it. and the...

The PPG colorWeb says that color is for the Thunderbird only. but I have no idea if it was used in the mustang aswell


DK RED, RED 1963 - 1965 Interior, Grille, Miscellaneous THUNDERBIRD ONLY ...

Did you mention it was an interior color? In my PPG systems I have an additive that goes in the base (basically makes it a weak single stage) for DBC its DX995 and Envirobase its T511.

I did just...

For PPG if you don't use the activator PPG will not give the stand behind the lifetime warranty.(This will not apply to a DIY job) Ding is absolutetly correct except about the VOC limits. It actually...

I would say a clay bar and spray most auto stores would carry this

This guy is one of my favorites.


http://www.youtube.com/watch?v=IIptN68Z2Co

Wow are all devillbiss users this naive? I use SATA guns, Len even owns some also, So your calling Len and I snobs? Also where did he say SATA's are the best in the world? He said he was using a...

Well that won't work for jay as he is using waterbased paint. It is much different to clean your guns with this type of paint.

I used liquid mask in the shop. We used it to spray down the cars when they came in to keep the dust and overspray problems to a minimum. It came in a 55 gallon drum, It did work pretty slick and in...

I see on Dupont it says its matched to a 2010 Cobalt them vettes must be to fast for them to get a match had to get a cobalt instead.


HAHA Jay !

but ya like Len says the tricoat will look...

I said in PPG it is a tricoat paint no matter what system you use. so its a tricoat in DBC,Shopline,Global,Envirobase,Omni

like I said in all PPG systems

832, 89, GBE, WA505G, WA505Q, WA551Q / PPG# 915635 - CRYSTAL CLARET, CRYSTAL RED is a tricoat in PPG no matter what system you use.

I checked in dupont and its a tricoat in chromabase(782250K)...

I looked up the manuals and the tip sets are different numbers . thats why I said no . and sorry about the Dan Am number as I thought you were in the US.

No I don't think it will, But just to be on the safe side call Dan am and ask them 1-800-533-8016

This is what I got from the link

http://www.ebay.com/itm/AUTO-BODY-REPAIR-STUD-GUN-WELDER-w-DENT-2-LB-HAMMER-PULLER-PROFESSIONAL-COMPLETE-/330665941960?pt=BI_Welders&hash=item4cfd39dbc8

I bought mine from a place over seas they read in Bar originally. but I sent them to Dan AM and they changed them over for free just cost me 7.00 in shipping.

ebay and craiglist have good prices...

ouch len I paid 350.00 for each of my SATA 3000 Digitals NIB guess it who ya know

len buddy don't get me wrong I love electric polishers like the makita I just like my air polisher(my snapon polisher got cold but my IR one dosen't), I have Digital SATA's so I have a read out on my...

don't waste your money on regulators for every gun just get a nice filter/ regulator /dryer setup just for painting . i have never had an issue with my air polisher slowing down on me but i guess...