Search:

My paint guy wants to use this on my 67 Fairlane instead of a base/clear. He suggested that with all of the sharp body lines he is afraid of going through the clear and into the base coat while...

Hey guys, is there much of a chance of warping the hood or deck lid if I sand blast the under side of those parts? These two pieces have the X brace on the bottom side and there are only three small...

finding all of the dents, dings, rust and other wonderful hidden goodies that didn't look nearly as bad when you went to purchase the once in a lifetime deal. I wanted to take this car for all of...

I am de-rusting and painting the inside roof of my Fairlane. It will be hidden under the headliner so I'm not worried about a show quality finish but I do want to be sure there is no more rusting. ...

is that about the going price for these items? Regular run of the mill acrylic enamel and hardener...not even RED it is BLACK. No wonder collision repair costs so much. If you guys know of a...

The guys who mixed my first quart hit it right on the money for the engine compartment and this quart looks like a freaking mirror. This was a ton of work sanding and prepping this area for...

Just finished painting my radiator support and inner fender/aprons on my 66 GTA Fairlane and the paint is way too glossy for my taste. Is there anything I can do, other than repainting, to settle...

I am thinking about this for my 66 Fairlane. Does anyone know about what this process costs? I was going to do the chem-strip but I have heard too many, not so good things about that process. ...

but I've used this hardener within the last month or so without problems. Does it go "bad" that quickly? I noticed this morning that the finish is finally beginning to harden.

I shot Martin Senour 2k epoxy primer waited about 1.5 hours then topcoated with Sherwin Williams acrylyd with advantage hardner. 24+ hours later the finish doesn't feel very hard. I placed one of...

Watch our for rusty tanks, that problem will render your compressor purchase pretty worthless. Good luck

That gives me hope. I priced a job from an over egoed youngster at a car show last year and nearly stroked. I've painted cars before, years ago and am pretty good at the process but I just don't...

I know, that is a loaded question and can vary a ton from shop to shop and area to area but I am hoping for a good ballpark from you guys. My car is down to the metal so it will require priming. ...

I had completely stripped the engine compartment of paint with media blasting and sanding and throughly cleaned the bare metal to remove any grease or oils from hands, tools etc. As I sprayed the...

5120 primer and 5123 activator Thanks, Joe

before I paint with my color coat? The product data says that you should recoat within 30min-1hour but does that mean to recoat with more epoxy or does it mean that it is ok to topcoat with your...