Search:

Yes, Catalyze your base 5%, you can use the hardener you will use in your clear if you like.

The idea of catalyzing basecoat is like this

Catalyzed urethane sealer
Catalyzed basecoat = doing...

yes you should be concerned about breathing in any kind of dust...

i would wear one of these

29184

mixing in single stage black 50/50 with clear and going over the SAME black is not going to do anything visible to your eye...

if he used basecoat it may have been HoK

because it is TV, scripted, that 50/50 mix does nothing. can go to just straight clear after SS

if there is question as to if there is enough mils, a mil gauge would help in the future

Air Gunsa 3.0 for poly

Surprised nobody is asking questions like,

are you taping over sprayed basecoat ? you will want to scuff inside the stripe if you are out of your window

do you plan to scuff after taping ? some...

a half tack coat followed by a wet coat will help, unfortunately that is pretty common on sharp edges.

are you using a sealer prior to basecoat ? alot of paint lines require sealer under black basecoat for this reason. its usually not a option on black.

This method works, but it works better if you tape each end of the blade and no tape on car,

the best method is a shark blade
...

Any automotive clear will go over gold leaf, use good sizing and if you want swirls like Len speaks of velvet works nice.

Use a graphite stick and do a rub over your tape to transfer, not a sharpie

im also at the assumption it attacked the foam

is that made out of EPS foam ?

"Recoat" means to apply another coat of the same product

"top Coat" means to apply basecoat or single stage or another product over it.

the tech sheet does not say its ok to top coat for up to...

if i was you i would lightly scuff the whole thing with a red scotch brite and recoat, add a little slower reducer to avoid getting that dry spray making it feel like sand.

the tech sheet gives a...

320 is to rough for base, hit it with some 600 and shoot base as long as you are in your window. a recoat window and top coat window are different.

Maybe this will help, No you should not paint over mil scale. some guys do, but it can lead to failure.

easily removed with Muriatic acid then neutralize,
...