TheCoatingStore.com

Search:

Type: Posts; User: Another Mazda story

Search: Search took 0.00 seconds.

  1. FLOORBOARD- Driver side floorboard of a protege --> how should I remove the grey piec

    28687

    Some of you have recommended that I place the patch under the carpet.

    Although I am hesitant to do this, I will take your advice!

    Ok please note *this is not off my protege, it's...
  2. Short answer is no Len, tell me something, if...

    Short answer is no

    Len, tell me something, if I cut that out, do I have to remove the carpet?

    Thank you sir.
  3. How to shape a piece of metal so its corrugated?

    Good Afternoon Team!

    So I am working on my floorpan, and I noticed that there is a section right under the pop rivet patch installed by the idiot (see picture); which has hole the same as size as...
  4. I'm in Ontario my car lives in the salt. What...

    I'm in Ontario my car lives in the salt.

    What shop did you buy that seam sealer from?
  5. FLOORBOARD REPAIR- what is an appropriate seam sealer - Canadian Members

    Good Afternoon,

    I have sanded the non-ecoat areas down; since this is the first time I am doing this repair; I am anxious regarding:

    1. What type of seam sealer to use? It has to be available...
  6. Thanks! I'm working in my backyard, I dont have a...

    Thanks! I'm working in my backyard, I dont have a professional shop.
  7. OPERATION MAKE HER LAST FOREVER UPDATE: So my...

    OPERATION MAKE HER LAST FOREVER UPDATE:

    So my objective is to preserve the passenger floorboards/floorpan area on my 20 year old Protιgι ( I did the rear wheelwells last year- doing a section at a...
  8. so there is no way of me making the patch flush,...

    so there is no way of me making the patch flush, without removing the patches?
  9. I know I should never of agreed to pop rivets. ...

    I know I should never of agreed to pop rivets.

    But I already paid and what can I do now?
  10. What to use to fill Gaps in Patches [Floorboard Repair]

    28606

    Good Afternoon,

    I recently hired a guy to install patches on my twenty year old floorboard, and I noticed that there are huge gaps in between the patch and the floor (Yes its pop rivets)....
  11. Thank you for your sagely advice Len, it's much...

    Thank you for your sagely advice Len, it's much appreciated.

    1. How long should this take a person with intermediate experience?

    2. Any particular reason you choose zero rust over POR15 and a...
  12. OPERATION MAKE HER NEVER RUST – Undercarriage - What do you suggest

    OPERATION MAKE HER NEVER RUST – Undercarriage - What do you suggest

    Morning everyone,

    So this is a picture of the undercarriage of my Protιgι, my objective is to have her last as long as...
  13. Replies
    13
    Views
    1,065

    Thinking what I should use to test the...

    Thinking what I should use to test the floorboard, could I use an old screwdriver?

    Sorry I'm an office boy I dont have a trades background.

    Thanks
  14. Replies
    13
    Views
    1,065

    Thinking what I should use to test the...

    Thinking what I should use to test the floorboard, could I use an old screwdriver?

    Sorry I'm an office boy I dont have a trades background.

    Thanks
  15. Replies
    13
    Views
    1,065

    Thank you. What should I use to grind the...

    Thank you.

    What should I use to grind the rust out the floor? Wire wheel attachment on drill? Orbital sander?
  16. Replies
    13
    Views
    1,065

    So no POR15 floor kit?

    So no POR15 floor kit?
  17. Replies
    13
    Views
    1,065

    Have you ever used the POR15 floorboard kit?

    Have you ever used the POR15 floorboard kit?
  18. Replies
    13
    Views
    1,065

    Thank you for the reply. So the rotten rusty...

    Thank you for the reply.

    So the rotten rusty existing metal I just use rust converter? And then glue the good patch right over?

    But what if the twenty year old metal is too thin?
  19. Replies
    13
    Views
    1,065

    HOW TO REPAIR HOLES IN FLOOR

    [ATTAC28403H=CONFIG]28403

    Good Evening,

    I have two holes in the floor, from where the jackstands went through, and I want to repair them before I POR 15 the entre underbody ( I want this car to...
  20. Replies
    5
    Views
    2,540

    Thanks for referring me to those links! They...

    Thanks for referring me to those links!

    They really helped a lot ! Very Useful!
  21. http://autobodystore.com/forum/showthread.php?3353...

    http://autobodystore.com/forum/showthread.php?33532-Right-Quarter-Panel-%26%2310145%3B-advice
  22. +1 ...

    +1



    http://autobodystore.com/forum/showthread.php?33532-Right-Quarter-Panel-%26%2310145%3B-advice
  23. Replies
    5
    Views
    2,540

    Right Quarter Panel ➡ advice

    Good evening,


    So frustrated getting this job done in the freezing cold snow!!

    26766What is that round orb in the first pic?

    Second pic➡ that's rough patchy surface ➡ so should I sand it...
  24. GUIDE COAT VS SPRAY PAINT What advantage do I...

    GUIDE COAT VS SPRAY PAINT

    What advantage do I have using guide coat over just buying a cheap can of spray paint or even primer?
  25. GUIDE COAT VS SPRAY PAINT What advantage do I...

    GUIDE COAT VS SPRAY PAINT

    What advantage do I have using guide coat over just buying a cheap can of spray paint or even primer?
  26. Every forum has it, I guess I will just reply to...

    Every forum has it, I guess I will just reply to each member post
  27. https://www.beatlesbible.com/forum/forum-rules-and...

    https://www.beatlesbible.com/forum/forum-rules-and-help-guides/how-do-i-mention-someone/
  28. Patchy piece of Bondo after applying new layer of Bondo

    Picture in link: https://i.postimg.cc/B8CWDzqm/IMG-20191126-173319.jpg




    Good Morning,

    I am new to bodywork, and I applied a fresh layer of Bondo.

    However, although the rest of the...
  29. Trying to Do BodyLines → HELP!

    https://i.postimg.cc/DJCtpb4s/IMG-20191126-173229.jpg

    Good Morning,

    If you click on the link you will see a picture attached where there is a green arrow which indicates the section of the body...
  30. This is what I mean @Len Thanks

    This is what I mean @Len

    Thanks
  31. You saw the pic? it won't let me post images...

    You saw the pic? it won't let me post images because they are in PNG format.

    Also how do I mention users in this forum?

    Thanks
  32. Hi thanks please take a look at this photo in the...

    Hi thanks please take a look at this photo in the link

    https://i.postimg.cc/NMZHdt0R/photo-editor-pro-20191125-180324.jpg


    So I plan on:

    1. Putting masking tape over the redline I the...
  33. Thank you.... Send me some whiskey to keep me...

    Thank you....

    Send me some whiskey to keep me warm as I struggle to do bodywork in subzero temperatures
  34. How to create body lines conforming to the exact measurement

    Hi again,

    So on the Left wheelarch the body lines ( the flat section around the wheelarch) are more visible, but the Right W.A., the Bodylines have to be created from scratch:

    I measured...
  35. Ok but how do I ensure that the body lines are...

    Ok but how do I ensure that the body lines are the correct measurements?

    Look at the pic again (RS Quarter Panel).

    Can you be more precise? In what manner should I be sanding?

    Thanks
  36. Thanks for the reply, but how do I make the Left...

    Thanks for the reply, but how do I make the Left dogleg perfectly flat and lined up properly?

    2. How do I put in body lines on a wheel arch ?

    This is what it's supposed to look like 26603
  37. LEFT QUARTER PANEL

    26595

    This is the left quarter panel.
  38. How to Finish this off ➡ Beginner

    Good Morning,

    So here I am in Ontario Canada, with snow in my yard,
    Still trying to finish the body work on my quarter panels:

    2659326594

    What you are looking at is new doglegs welded in,...
Results 1 to 38 of 38