TheCoatingStore.com

Search:

Type: Posts; User: Rodzilla

Search: Search took 0.03 seconds.

  1. The panels are plastic, about 1/8" thick at the...

    The panels are plastic, about 1/8" thick at the edges. i can't notice the cut when mounted on the bike and would leave as is if i wasn't worried about the paint chipping away or lifting. Never...
  2. Had to make a trim on a nicely painted piece

    My side panels on my Harley don't clear the new swingarm at lower edge. Of course I only discover this after painting them. So i needed to make a trim of the plastic panel. What can I use to seal the...
  3. Check the link, hey actually have a 2k clear...

    Check the link, hey actually have a 2k clear specifically for headlights.

    https://www.spraymax.com/en/products/product/clear-coats-and-spot-blender/2k-headlight-clear-coat/
  4. I've seen youtubers doing headlights with...

    I've seen youtubers doing headlights with spraymax, although i didnt pay attention to results since it wasnt the topic i was looking for.
  5. Thanks Len. The spray max technical sheet tells...

    Thanks Len. The spray max technical sheet tells you how much time between coats, but not how long to wait if you need to sand and recoat. I have read some guys saying wait a whole week to fully cure.
  6. I guess I should have mentioned where the clear...

    I guess I should have mentioned where the clear is too this, its not glossy and a bit textured to the touch.
  7. Didn't get full clear coverage on bottom edge of Harley tank

    I painted and cleared my Harley gas tank. Vivid black and cleared with 2k Spraymax, all rattle can. Had already sprayed side panels that turned out perfect. But this time, the next day I checked on...
Results 1 to 7 of 7