Search:

I have used Zero Rust's Prep Step as a cleaner and pre paint conditioner on projects like repainting light poles and water tanks. You spray it on, work the surface with a wire brush, rinse, then...

What is the actual shelf life? I have some that is a year old. Is it still doing it's thing?

I am painting a chipper that has some rust in between the frame and the sheet metal siding. The sheet metal is heavy and tacked to the frame with welds. What is the best method of stabilizing the...

Advice taken, thanks!

I am repainting the doors and ball caps on a trailer that has new sides with a grey metallic finish. If I can't match the paint on the rest of the trailer, I would at least like to complement it. ZR...

I am restoring an old trailer piece by piece. I have Zero Rust, Picklex and Transtar 2K primer sealer on hand. I can grind off the old finish and sandblast the pits, but I can't get 100% clean metal....

I have a steel frame that needs to have sheet steel tacked to it. Can I paint the frame with zero rust before it is spot welded, or should I use a weld through primer?

Thank you Phil, I appreciate your input. My sheet metal is very heavy, and I plan on painting the inside and out with zero rust, after cutting out the rusted out spots and welding on patches.
I am...

Hmmm...is there a galvanized, or coated rivet? I have read that stainless is very corrosive too. Does anyone have a favorite source for rivets where I can get some customer service?

Also does any...

Trailer manufacturers use double sided tape when attaching aluminum panels to steel frames. I could use that, and still rivet the edges for good measure. I can also paint the underside of the...

I have an old horse trailer with a heavy sheet metal skin that is starting to rust out in spots. I purchased some new painted aluminum panels at a scrap yard for less than the price of good paint. I...

Demented Dave,

"however where i work has this stuff which is basically like 2 different colors of clay, one wrapped around the other. you break off a piece of it, knead it for a while and you can...

We are having a warm spell, and I would like to sandblast a few rust spots on my trailer and spray with a 2k epoxy primer outdoors. The product sheet lists 2 hours of dry time at 50 degrees. What is...

I have a few patches of All-Metal filler that I would like to spot prime. I would like to use a rattle can primer instead of mixing a 2 part epoxy for a small spot. Can I use a spray can etch primer...

I am chipping off the undercoating on the inside of a horsetrailer. It flakes off by just dry scraping. Underneath is shiny metal with flea sized specs of rust. I plan to paint the inside with...