DeVilbiss is offering their top-of-the-line Tekna Pro Lite with a FREE 35' HOSE ($98 value) for a limited time. Click on pictures to see options and...
I'd let it sit for a week or so to cure out better. Rescuff and go with light to medium coats as this is what what you need with that stuff. Read the...
Almost any paint looks good when first applied, it's a year or two down the road that tells how good it is. Also some less expensive products can be...
The problem with most paint in an aerosol can is that it's not hardened but you can now purchase cans that have an activator container within the can...
I would probably mix a little of the thinner with a little bit of paint to make sure they were compatible and shoot it with the 1.5 tip in the 670. ...
I don't like using a Scotch Bright because it leaves an uneven scratch, some scratches can be deep and other almost nonexistent. The only time I use...
After you paint the jambs and install the panels then mask off the jambs so that they stay fresh and without overspray. The best think I've found to...
Find latest posts
