How wide is the fan on the dura-block

[68-chevyman]

I was looking at the dura-block guns and wondering how wide the fan was on the GMS 1.3 conven. and the HVLP. Also the fan width on the GMS spot gun 1.0. And do you think the conven. gun would break up clear better (not concerened with wast or overspray as long as it isn't extream)

[Len]

I'd say the fan on the 7003 is about 10 to 12 inches and the small gun is probably about 6 to 8 inches.

The conventional gun would probably break up the paint better but they are usually more difficult to handle than HVLP guns.