911 Question

[911-1978]

I just bought a 911, what is the best way to clamp the car to the frame machine.

The car was tapped in the nose, all the running gear and rear suspension are still in place. The longintudial pinch seam/weld at the base of the rockers is my first thought, but it just doesn't seem that strong. Any suggestions would be appreciated.

[Len]

The rockers may hold but it will depend on how hard you need to pull. If it's hit real hard it may pay to section the nose or just replace sheetmetal with minimal pulling. We did one a while back that we ended up cutting off the nose and replacing everything in from of the windshield.