View Full Version : Two Tone car
01-11-2006, 06:21 PM
Hi, guys, I am ready to put on the color blue and white, the roof is white and the bottom is white with verything inbetween blue, what is the proceedure for spaying this?
01-11-2006, 07:14 PM
Spray the blue in the middle first, mask it then shoot the white, then clear all if you are using bc/cc.
I usually shoot the color that will take the least amount of time to mask first then I mask it and shoot the other color. If the second color will be cleared I shoot the first color then sand it with some 800 or 1000 grit then I mask it, shoot the second color then unmask the first and clear the entire vehicle.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.