View Full Version : Doublecheck-I can shoot Epoxy Primer with a 1.5 tip?
08-16-2006, 04:09 AM
I just want to doublecheck--can I shoot Epoxy Primer with a 1.5 tip? Getting ready to prime with Kirker Enduro Epoxy Primer soon as the heat breaks to 82 or 83. Thanks.
Doublecheck-I can shoot Epoxy Primer with a 1.5 tip?
I'm not familiar with Kirker but I shoot Glasurit epoxy using a 1.4 tip. I would think that the Kirker is a similar viscosity and that the 1.5 would work fine.
08-16-2006, 08:32 AM
I shoot Kirker with 1.4 no problems..
08-16-2006, 08:37 AM
It should shoot the epoxy fine. If it goes on not quite as smooth as you like then add just a little bit of urethane reducer. Why would you wait for the temps to drop to 82 or 82 deg.F. ?
08-16-2006, 12:19 PM
Powered by vBulletin® Version 4.2.2 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.