PDA

View Full Version : finished 3 coats top coat, ?


TheCoatingStore.com

39 chevy
08-01-2011, 07:42 PM
I have quite a bit of lint in my finished product, what grit should I use before I buff it out or what would u suggest? Thanks, Dana (Just finished 2 hrs ago)

Len
08-01-2011, 09:10 PM
I have quite a bit of lint in my finished product, what grit should I use before I buff it out or what would u suggest? Thanks, Dana (Just finished 2 hrs ago)

Normally you should sand out the nibs with 800 or 1000 grit wet paper on a small hard block then switch to 1500 then 2500 before buffing.