finished 3 coats top coat, ?

[39 chevy]

I have quite a bit of lint in my finished product, what grit should I use before I buff it out or what would u suggest? Thanks, Dana (Just finished 2 hrs ago)

[Len]

I have quite a bit of lint in my finished product, what grit should I use before I buff it out or what would u suggest? Thanks, Dana (Just finished 2 hrs ago)

Normally you should sand out the nibs with 800 or 1000 grit wet paper on a small hard block then switch to 1500 then 2500 before buffing.