PDA

View Full Version : Coming around the turn and?


TheCoatingStore.com

mjsorl
06-27-2011, 03:29 PM
Good afternoon,

Spent my weekend putting back bits and pieces, and doing all kinds of little touch ups and details. I have a problem on my hood or at least I think it is a problem. Put the hood back on last week, sanded down with 3M trizact 1500 after blocking with 2000, finished up with 3000.

I know that you folks don't sell the meguiars I am using, so it's shame on me for not Hearing about you prior to the start of this project and just maybe I would not be in the straits I find myself, so any help would be more than appreciated.

Compounded with Meguiars 105 with a rotary buffer and a 3M 5917 wool pad.
Polished with Meguiars 205 and Black LC foam
Finished with Menzerna and a LC Gold Jewel Pad.
After all of this I saw a pigtail ii the sidelight and I chased it, using the Trizact 1500 and 3000.
Re-polished and compounded the area, even now it does not have the same "depth or brightness that it originally had.

In advance thanks for any help

Any Ideas? :0

Skalabala
08-03-2011, 02:53 AM
Did you try to use Meguiars dimond cut?
And did you use water while buffing?