PDA

View Full Version : single stage finishing help


TheCoatingStore.com

pwh123
11-18-2010, 03:03 PM
Hey Guys
Just finished paint with PPG Concept single stage. Have wet sanded with 1500 and now I need all the info I can get on equipment and procedures recommended from now. Buffers, compounds and etc.
Thanks ahead
Phil

Len
11-18-2010, 07:01 PM
Hey Guys
Just finished paint with PPG Concept single stage. Have wet sanded with 1500 and now I need all the info I can get on equipment and procedures recommended from now. Buffers, compounds and etc.
Thanks ahead
Phil

Phil
You can start by doing a search on "polishing" here by using the search block on the top right hand side of the forum and check out the links below.


LINK 1
(http://www.autobodystore.com/rsw.shtml)
LINK 2 (http://www.autobodystore.com/swirl_removal.shtml)

The Makita 9227 (http://autobodystore.net/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=T2) is one of the better machines for poliahing and Sure Finish Polish (http://autobodystore.net/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=M3) is an excellent product for using with any polisher.

pwh123
11-18-2010, 09:57 PM
thanks Len
I used your dvd and a hobby air system to get this far, so I'll work up an order for you tomorrow.
Phil